Dip Powder Step-by-Step
Difficulty
Easy
Time
45'
Cost per Mani
$2.79
Products used
STEP 1 - PREP
- Use a cuticle pusher to gently push back cuticles. Use a cuticle nipper only if you need to.
- Lightly buff your nails along the tops and sides to give them a matte look so your manicure will stick to your nails much better.
- Remember to shake the Glam Powder jar or stir the powder with a clean utensil before use.
STEP 2 - DEHYDRATE
- If you have the Essentials Pro Kit on hand, use the primer on your nails. This will ensure your nails are totally clean and oil-free.
- Otherwise, take a lint-free wipe soaked in alcohol and rub down your nails.
STEP 3 - BASE COAT
- Remember to shake the Glam Powder jar or stir the powder with a clean utensil before use.
- Apply Rossi Base Coat to the ¾ of the nail and immediately dip into the jar.
PRO TIP: If the product touches your cuticles, remove it straight away with an orange woodstick, so it won't harden on your skin.
STEP 4 - DIP
- Dip the nail into the powder at a 45-degree angle to ensure a smooth powder surface.
- Tap the finger to remove excess powder.
STEP 5 - BRUSH
- Brush off excess powder with a clean fluffy brush after finishing one hand.
PRO TIP: Don’t brush off straight away, it’s better to let the base absorb the powder.
STEP 6 - NEXT LAYER OF BASE COAT
- Apply another layer of Rossi Base Coat this time a hairline away from the cuticle.
PRO TIP: To ensure even application, hold the brush parallel to the nail, moving it from the cuticle to the free edge in long strokes.
STEP 7 - DIP AGAIN
- Dip the nail into the powder at a 45-degree angle to ensure a smooth powder surface.
- Brush off the excess powder.
- Repeat the Base Coat and Dip steps if needed.
STEP 8 - ACTIVATOR
- Liberally apply Rossi Activator and wait 2 minutes for the nail to harden.
- Activator is what sets and cures the powder.
- Let the nails fully harden before attempting to file or buff them.
STEP 9 - BUFF & FILE
- Buff the surface of the nail for a smooth manicure.
- Do not buff too much, so the nail will keep its strength.
PRO TIP: Remove the filing dust using a lint-free pad soaked in alcohol. Don’t use cotton balls as they leave white fluff behind. Don’t wash your hands at this step.
STEP 10 - TOP COAT
- Apply two layers of the Rossi Top Coat.
- Use quick strokes.
- Allow the first layer to dry for about 2 minutes.
- Apply second layer and wait 3-5 minutes for the nails to fully dry.
STEP 11 - HYDRATE
- Massage Rossi Nourish Cuticle Oil into the skin surrounding the nail plate.
-Be sure to continue applying the cuticle oil over the days to come to keep your cuticles healthy and moisturised.
-And that's it, you're done!